Skip to content
Contact us
  • There are no suggestions because the search field is empty.

Star Micronics mG-T Scale Setup

Setting up bluetooth configuration for use with DeliLabel and KitchenHand

 

  1. Power ON the scale by pressing and holding the Zero button.
  2. During startup, when you see “u1.131F”, press the Tare button.
  3. Press the Tare button x2 you get to “F2 Con” and press the Zero button.
  4. You will see ‘b-U” and you will press the Zero button once to get to "bt” or "USB". 
  5. If it says “USB” then press the Tare button once to change it to “bt”.
  6. Press the Zero button once again and you should see a series of options you can pick through with the Tare button. Press the Tare button until you are at “Con 1”.
  7. Press the Zero button once to return back to the main settings menu.
  8. Press the Tare button x4 and you should see “back”. Press the Zero button and it should bring you back to a zeroed out weight display.